USB to SATA Problems

Novi sa dodatkom za napajanje idVendor=152d, idProduct=0576 JMicron Technology PhiHardisk H1 Device name: ANKEJE USB3.0 original firmware:

USB to SATA Problems

Onaj prvi što ne radi:

JMicron USB to SATA Bridge (152d:9561) JMS56x (for real: unknown) JMicron Technology USB to ATA/ATAPI Bridge original firmware:

Ugaoni onaj:

idVendor=152d, idProduct=0578, bcdDevice= 2.09 Product: JMS579 Manufacturer: JMicron

JMicron Technology JMS578 SATA 6Gb/s

JMS578 Sata/USB 3.0 Controller

Also here update tool:

original firmware:

Probaj ovaj:

idVendor=174c, idProduct=55aa, bcdDevice= 1.00 Product: YZWY_TECH Manufacturer: Min Yi USB Device

ASMedia Technology ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge Probably: ASM1153E (same as ASM2115?) The ASM1153 is limited to SATA 3 Gbps

Firmware Update Tool: Generic ASM1153E Based M.2 SATA3 to USB3 Bridge | - Legacy Storage Products Firmware and Downloads - Plugable Knowledge Base

HERE: Asmedia

STICKY: If you have a Raspberry Pi 4 and are getting bad speeds transferring data to/from USB3.0 SSDs, read this - Raspberry Pi Forums

About version numbers: Understanding Asmedia ASM2115/ASM1153E USB-to-SATA firmware versions Firmware dumper: smx-smx/ASMTool: Firmware dumper and various utilities for ASMedia USB Controllers and related firmware

original firmware: 141126a1ee01 this “141126” is for chipset, and “a1ee01” is for date

ASMedia Dumping And Flashing USB SSD HDD Drive Adapters - MPTOOL - YouTube

From my experiments the ASMedia chipset is pretty much the go to chipset. Every JMicron I’ve come near does not work without USB Quirks.

test speed

cd /mnt/data/supervisor/tmp dd if=/dev/sda of=tempdata bs=8k count=256k

write speed

cd /mnt/data/supervisor/tmp dd if=/dev/zero of=tempfile bs=1M count=256

read speed

hdparm -Tt /dev/sda

detect usb devices

dmesg | grep usb

or simpler


check for trim

fstrim -v /

also trim

lsblk –discard /dev/sda

Firmware update

Fixing Storage Adapters for Raspberry Pi via Firmware Updates

Insufficient Power Symptoms

Symptoms of a lack of power to the drive can include the system only booting sometimes (or not at all) or working for a while and then locking up. Just because the drive boots does not mean it is getting enough power. Some commenters on previous articles have described this as working fine until there was a sudden spike in CPU usage while they tried to do several things at once (high CPU, accessing storage, activating various hardware all at once) and then they would get a lockup/crash.

Best Working SSD / Storage Adapters - Raspberry Pi 4 / 400

Raspberry Pi USB Boot with JMS578 Based USB-to-SATA Enclosures | Dev With Imagination

How to Update Firmware of JMicron JMS578 - USB3.0 - Sata Enclosure (Black Screen/Lock/Music Stop) | - The Independent Video Game Community

odroid-xu4:software:jms578_fw_update [ODROID Wiki]

Asmedia, in particular, is a subsidiary of ASUS and has good technical strength.

JMMassProd2 is the mobile hard disk box JMS578 firmware

About LEDs on Raspberry Pi

The real Raspberry Pi Power power draw limits and requirements.

Svi fajlovi uglavnom kao na station-drivers:

JMicron Technology Corp – [] ASMedia Technology Inc – []

date 11. Oct 2023 | modified 10. Jun 2024
filename: » USB SATA Problems